-
Uses the Realtek chipset 0bda:0411, 0bda:5411.
Works with no issues on Linux 6.xx
Needs -r 1000 (or a little less) for Linux 5.xx
Current status for hub 2-1.1 [0bda:0411 Generic USB3.2 Hub, U…
gam3 updated
9 months ago
-
A zone connecting R1 to six nearby vias is missing in r1.3.0. A connection through another via exists but may limit maximum current. If sustained pass-through current of more than 1 A is desired, we r…
-
Hi,
I was trying to port the ST USBPD library to work with Arduino but discovered your project.
However, it seems you only support STM32G431xx. This part is not so different from the G474. I am work…
-
Hi，
@jakkra @Kampi
Our board voltage is incorrect, and we suspect that the MCU is broken. Then, we replaced the MCU in the NORA-B10 module with a new one and used it in VS code to download the prog…
-
Firts of all thanks for your resol/vbus libs and software.
I tried to toolbox today and the install on my Raspberry Pi Zero 2 W with raspian seemed fine.
Then i ran for example the text logger …
-
https://devtalk.nvidia.com/default/topic/1065636/jetson-tx2/i2s0-aplay-okay-but-i2s1-arecord-failed-/
![QQ截图20191112135436](https://user-images.githubusercontent.com/32056331/68645813-2555e780-0554-1…
-
I have a TX2+J120 carrier board with Logitech USB Camera connected to OTG Micro USB, LTE USB Modem connected to USB3 and ZED connected to the second USB3.
Everything work but ZED camera requires me t…
-
```
[ 7.430207] ath11k c000000.wifi: ipq6018 hw1.0
[ 7.430249] ath11k c000000.wifi: FW memory mode: 0
[ 7.433873] remoteproc remoteproc0: powering up cd00000.remoteproc
[ 7.438478] rem…
-
反馈bug/问题模板，提建议请删除
## 1.关于你要提交的问题
Q：是否搜索了issue (使用 "x" 选择)
* [x] 有类似的issue: #7949, 但没有解答
## 2. 详细叙述
### (1) 具体问题
A：路由器通过DHCP获取上游光猫下发的IP, 正常用了一段时间了, 昨天突然无法连接的
### (2) 路由器型号和固件版本
A：…
-
Hi
i have another question :)
i did not see any user or password info in the scripts/mqtt file.
Can you let me know if that is supported or maybe ideally provide a config examples how to send …