-
Embeded system with microcontroller (teensy) and motor controllers to drive the drill motors.
May be easier if issue #13 is done.
-
Relies on issue #7.
-
Make a usb hub based on the TUSB2077A chip by TI.
- [X] remove over current protection (for simplicity)
- [X] Invesigate/remove resistor network
- [X] Simplify connector circuits
- [x] Redo layout
-
Last years board had many issues. It may be just as easy to redign it rather than fix the problems. We would definately take ideas and some sections from the old design to save time.
One thing to dis…
-
@Bitfroest
-
So I am 99% sure everything is wired correctly.
When I turn my board on, the red light blinks. When I connect the app, the blue light goes solid (red light still blinks), and the app says "Bluetooth …
-
So the pin configuration is slightly off (by 1. I'm soldering straight to the vesc, so I noticed this, but for those using the port and plug method, they will be soldering to the wrong pins. here's wh…
-
Hello,
Is it possible to include the VESC command "COMM_GET_MCCONF"? I tried it myself but get stuck at the comamnd "//ToDo: Add Message Handling > 255 (starting with 3)" from your "switch (messageRe…
-
I see this
![2016-03-10 14 26 02](https://cloud.githubusercontent.com/assets/922873/13669415/10fe0c72-e6cc-11e5-8bcb-37fb7a6461bd.png) instead of normal man pages.
Or in text:
```
ESC[1mNAMEESC[0m
…
-
Enkrat cez dolgo dolgo casa...