-
requested by \@rampico
**Vendor/Model**
Please provide the target name. e.g. `VGOODF722DUAL`
Please provide vendor and model of the FC. e.g. `30.5x30.5mm V-Good / Racerstar StarF7 F7 Flight Contr…
-
requested by "@Vin"
**Vendor/Model**
`Eachine Cvatar CineWhoop`
`Eachine F722 mini Flight Controller`
https://www.eachine.com/Eachine-Cvatar-142mm-6S-3-Inch-Cinewhoop-Duct-FPV-Racing-Drone-PNP-…
-
While installing iNav 6 on a new flight controller arming with my transmitter and raising the throttle on my transmitter allowed the motor to spin even with the motor output toggle disabled in the out…
-
### Describe the bug
In BF 4.4 Cloud Build on DarwinFPV CineApe 25 the barometer do not work. It work On Core Only.... Even if I insert an SD Card for the blackbox this is not recognized and It sign…
-
### Describe the bug
SD Card does not detect. Impossible to write any Log data on SD card. It randomly worked on older Betaflight 4.3.3 but just randomly.
### To Reproduce
Try to read SD Card…
-
It would be great to have a better resolution for pitch and roll using smartport. We want to measure angle of attack changes with a glider.
-
### Issue Description
Can someone please explain why labstack/gommon/random is using math/random over crypto/random. This is what is used to generate the CSRF tokens.
All it does is reset the ra…
-
- [x] Document use of `mwp-log-replay` in the user guide
- [x] Build `mwp-log-replay` by default
~- [ ] Consolidate all log replay options into a sub-menu~ maybe not?
- [x] If `mwp-log-replay` is …
-
Parameter name correction for setting up the Baud rate of the Rx serial port.
At the 3rd paragraph on page
https://www.expresslrs.org/quick-start/ardupilot-setup/?h=ardupilot
the Ardupilot param…
-
### Describe the bug
Upon flashing BF 4.4.0 RC1 via Configurator 10.9.0 (7df8d62) and applying board defaults for the FLYWOOF745NANO, no Ports are available. This also renders the Gyro and Accelerome…