-
As I dive more into the code for OnStep, I come across areas that I have questions on ...
Including:
- What is T4C for? This is the Texas Instruments Tiva C board, but we don't have a build for…
-
In #97 @hartytp asks
> Assuming we don't find any major mistakes in the prototype hardware, when do you think a second hardware order will take place? This will affect how much prototype hardware …
-
Noticed 2.3 allGears.stl are too big. causing the excesive loose between gear and a m8 nut.
Video illustrating the issue https://www.dropbox.com/s/prcmcj2ue2snl6q/File_000.mov?dl=0
2.3 version have a…
-
Hi all, I have a problem when calibrating the steps of the motor, I bought a gearbox of 1/10, the driver I have it to 1/32 microsteps, to intruducir the value of the steps GRBL does not support the re…
-
* [x] in the standard BOM, DNP J20 and J24
* [x] around IC6, AFAICT the compensation component values are not critical and can be chosen with tolerances
* [x] drop R64, R80
* [x] take a regula…
-
I have looked through all repositories, but am unable to find any detailed schematic diagrams. Does that not belong included in open HW design? Where can I find it? I am not interested in BOM or boar…
-
I don't know another way to reach you so i am going this route.
I just built a this board and posted it up on reddit. I want to do a group buy and i wanted to see if you would have an issue with th…
-
* [x] Is the LTC6957 needed? IMHO we can skip it.
* [x] The SMA assignment is not the way we'd want it. I'd like to be able to get the recovered DRTIO clock out of Kasli, then feed it through some ex…
-
May it be useful to you.
[Disabling Intel ME 11 via undocumented mode](http://blog.ptsecurity.com/2017/08/disabling-intel-me.html#more)
-
Given the issues I encountered, it'd make sense to split the configuration. There would be a hardware configuration and a user configuration.
The hardware configuration would contain all the hardware…