-
Hello,
When starting GQRX, bladeRF micro A9 is detected and initialized and using 10MHz samplerate.
But when GQRX tried to configure the bladeRF gain settings the next thing happens;
gr-osmosd…
-
Is there a way to read out the slow ADCs on the E2 Extension connectors right now?
-
I have followed the tutorial : https://red-pitaya-fpga-examples.readthedocs.io/en/latest/_downloads/StartprogrammingFPGAusingRedPitayaboard.pdf
And the result of my compilation is following (bit-st…
-
### TL;DR: Install the official Realtek drivers: https://www.unixblogger.com/how-to-get-your-realtek-rtl8111rtl8168-working-updated-guide/
### Description of the setup:
* Device: **STEMLA…
-
### Description of the setup:
* Device: Hamlab (redpitaya)
* SD card image: latest 21 juli 2017
* Application: powersdr charly 25 hamlab
* Other relevant information:
### Description …
-
This is a question.
Using transmit-wspr-message from the SD card 3.8.
The transmission of a wspr message is initiated by memory mapped i/o:
*fifo = (uint32_t)floor((1.0 + 1.0e-6 * corr) …
-
Hi,
I followed the advice from #667 and I installed the gqrx 2.11.5 from the repository.
Unfortunatly, the application is really really slow just to show me the configuration window.
In a cli I j…
-
Hola amigos buenos dias, al tratar de correr la orden sudo python simple_IMSI-catcher.py
me saca el siguiente error:
WARNING: No route found for IPv6 destination :: (no default route?)
Nb IMSI ; …
-
Hola, hace unos días instalé #Ubuntu 16.04 LTS y con el todas las dependencias y herramientas que se necesitan para poder utilizar GNURadio junto con un stick de radio RTL-SDR.
Al momento de utiliza…
-
Bonjour,
Je cherche a comprendre si avec l'image PlutoSDR "custom" que vous avez crée avec tous ces outils et scripts, il est possible d'utiliser mon PlutoSDR pour mesure la courbe de réponse e…