-
I am trying to restore a backup from NCP 1.49.1 NC 23.0.9.1 to NCP 1.50.2
the restore works but I am getting this error message in NCP-backend and when trying to access NC:
`This version of Nextclou…
-
Hi,
On a Linux system backed by multipath FC I would expect the see the io on the individual devices (sda, sdb, sdc, sdb), but numbers looks very low. There are also the */dev/dm-* and */dev/mapper…
-
Need to model driver & index from `smartctl --scan` so that the `--device` parameter can be passed during performance stat collection.
`/dev/bus/0 -d megaraid,8` for example
May need new system …
-
Caught fatal signal - signo:11 code:1 errno:0 addr:0x564701221e60
Obtained 23 stack frames.
#0 0x007f2f9d7343c0 in funlockfile
#1 0x007f2f9ce00561 in mono_set_break_policy
#2 0x007f2f9cdeafa4 i…
-
The converter cannot convert a Qiskit circuit with rotation gates such as a Rx gate.
-
-
If I add HDD and NVME to devices in the Inventory, don't created osds with "osism-ceph osds".
node.yml:
```
...
devices:
- /dev/disk/by-path/pci-0000:01:00.0-sas-phy0-lun-0
- /dev/disk/by-p…
-
### Overview
We need to make sure that all text on the site is minimum 16pt, including text on the SDG icons, which will also require padding changes to accommodate.
### Details
We need to make …
-
### Description of the problem
Hi, driver installed, it's green in packages, followed instructions it seems ok but the adapter not showing up in network interfaces
I bought TUC-ET2G as mentioned co…
-
while having to work on directpv I accidentially upgraded minio from a quite old version, skipping many releases.
It probably was `RELEASE.2022-06-25T15-50-16Z` or a few before, going straight …