-
I managed to get fbtft compiled with the Edison kernel using the Yocto Project and [wallacezq's recipe](https://github.com/wallacezq/fbtft-yocto-recipe). I have an [Adafruit 1.8" LCD](https://www.adaf…
-
### PROBLEM DESCRIPTION
After upgrading to 11.0.0 from 10.1.0 the ESP of my H801 LED controller in my lamp crashes (can no longer be controlled via MQTT/WebUI, lamp still on). The crash happens when …
-
With the latest Arduino tools the `Makefile` is no longer required, but some users may still value it for automated builds in exotic environments. Should the `Makefile` go away at this point, or shoul…
-
Now that `max_size` has been disabled in `shared-bindings/displayio/Group.c` ready for removal in CircuitPython 7, it needs to be removed from all the libraries that make use of it before this can hap…
-
Hi, Trying to get a 7789 display to work with an esp32. I run usersetup and it reports correct pinout.
When running this the display shows black and white corrupt image.
Run colour test and the dis…
-
Hi all,
I have problems mounting sd card:
```
[E][sd_diskio.cpp:708] sdcard_mount(): f_mount failed 0x(1)
Card Mount Failed
```
```
Connection:
MOSI 23
MISO 19
SCK 18
SS 5
```
[Micro …
-
I use your v0.2.0 code. and i'm using 1.5 inch OLED module with esp32 nodemcu.pls sir solve my problem
 code in https://kameleon.io/@niklauslee/ssd1306. Upload action will load code automatically.
2. enter `.load` in terminal.
3. system …
-
Hello Bruno,
according to the IceStick Tutorial, I executed “make ICESTICK”. This leads to the following error message on my system (Ubuntu 18.04):
/home/bernd/fpga/mue/project/riscv/femtorv_210…
-
### PROBLEM DESCRIPTION
I have two Shelly 1 devices, both with Tasmota 9.5.0, but one is compiled **with** `USE_ADC_VCC` and uses this template:
```
{"NAME":"Shelly 1","GPIO":[0,0,0,0,224,192,0,0,0…