-
Added the following configuration dts file for BMC failover flash.
_flash@1 {
status = "okay";
label = "alt";
m25p,fast-read;
spi-max-frequency = ;
};_
Firmware…
-
I am having trouble running the libmetal demo on Linux. It seems the IPI device is not defined.
During boot the drivers say the IPI device is not defined.
Here is the boot message related to the r…
-
we using NUC980 I2C-0 to reading rtc from pcf8563, but can't get normal value
(we try first using i2c-tools to get register value from pcf8653, command just like that);
 a major milestone, and you should be proud of yourself... …
-
Xianjun, could you help me solve this problem?
**I set an Zynq as an AP by hostapd, the hostapd-openwifi.conf is as follows:**
///////////////////////////////////////////////////////
interface=sd…
-
**Description**
**Steps to reproduce the issue:**
1. Install last successfulbuild sonic-broadcom.bin build date Jan 6, 2020, (SONiC Software Version: SONiC.HEAD.168-dirty-20200106.050955)
…
-
Problem to start pre-built image from https://users.ugent.be/~xjiao/openwifi-1.0.0-ghent.zip
SDCARD is created using
sudo dd bs=4M if=openwifi-1.0.0-ghent.img of=/dev/sdc
console out is:
roo…
-
On Lucian his system:
https://vrm.victronenergy.com/installation/47448/overview
the grid meter is connected to the missing ftdi usb.
Venus OS v2.53
and there is another ftdi usb rs485 inte…
-
Hi,
I am getting a kernel panic when I am trying to associate to the AP after launching `fosdem.sh`.
It happens with both the default BOOT/devicetree and the ones compiled from scratch:
```
root…
-
I'm following the quick start and meet the error shown as below when running ./fosdem.sh
xilinx-vdma 43000000.axivdma: failed to get axi_aclk (-2)
xilinx-vdma: probe of 43000000.axivdma failed wit…