-
I have bought Neopixel ring and matrix, both are not working with AMB82-MINI (RTL8735B),
https://www.amebaiot.com/en/amebapro2/
it would be good to see Neopixel working with this EdgeAI MCU (WiFi, B…
-
https://learn.adafruit.com/adafruit-neopixel-uberguide/overview
-
Check out the Freenove example code and AdaFruit Neopixel code to see how you can do this. After you've figured out how to turn those particular lights on and the correct color, create a library…
-
I think there is an SPI buffer issue occuring on the Pi5.
I ran the code from here: https://docs.circuitpython.org/projects/neopixel_spi/en/latest/examples.html
The lit LED stops after 339 LEDs.…
-
- Arduino board: Circuit Playground Rev B
- Arduino IDE version 1.6.8
Sometimes when uploading code the NeoPixel below the GND pin next to the USB connector will light green and stay on. On next upl…
-
I'm attempting to compile Marlin Firmware on my MKS Sbase 1.3 board which is based on LPC1768. I am unable to turn on Neopixel support because Adafruit_NeoPixel which doesn't have support built for L…
-
Since these things are so widely used, I thought somebody must have already written some code using them with automaton. I haven't found anything yet. Can you point me to any example using either th…
-
Hi,
I have follow the [Adafruit Guide](https://learn.adafruit.com/neopixels-on-raspberry-pi/wiring) to wire my led strip ws2812b (of 10 led) to Raspberry Pi Zero W using the SN74AHCT125N as level con…
-
Board reference: http://oshchip.org/
I'm attempting to get a single LED working on the OSHChip board with no Soft Device.
Code
```
#include "nrf_delay.h"
#include "nrf_gpio.h"
#include "boar…
-
- attempted to take your ili9488.py for a spin.
- using a 480x320 display.
display = ili9488.ILI9488(display_bus, width=480, height=320)
- getting a IndexError: index out of range on this line wh…