-
Hi, Using 4.3.9 Configured with the online configurator. Have 2 nozzles set up by adding the following to configuration_overall.h
#define SWITCHING_NOZZLE
#if ENABLED(SWITCHING_NOZZLE)
#de…
-
Cannot get the TFT35 touchscreen to work with octoprint using a MKS GEN L?
When removing the touchscreen, octoprint works normally.
How to fix this problem
-
Using latest build 4.3.9
Have rocking hotend and using Dondolo dual extruder Bowden . (Hotend 1 to the left, z probe in the middle and hotend 2 to The right).
Dondolo servo index is 1, the other "…
-
## Current Behavior
The optic flow & lidar sensor MTF-01 work well in INAV6.1 and INAV7.0 as the video: https://www.youtube.com/watch?v=bEKm-PGRnks
But when I upgraded the firmware to INAV7.1, the q…
-
Hello, thank you for your open source project. I have encountered this problem. How can I fix it?
`Traceback (most recent call last):
File "train_net.py", line 58, in
launch(
File "/root/…
-
-
Just power off both heater and bed :(((
Two different (mirrored) pcs at the same heigh.
Hardware: DUE+RAMPS-FD+LV8729 (XY) 8825 (Z+E)
Repetier, Marlin 2.0 works well
`/**
* MK4duo Firm…
-
### Did you test the latest release build?
Yes, and the problem still exists.
### Bug Description
When enable FT motion with command M493 S11 A37 B37 D0 P1 K0.18 homing failure (as if he doesn't s…
-
I just recently got the SKR V1.3 for the wiring simplicity and 32 bit stuff. Sadly, this has also created a few issues. The SPI jumpers are in the correct places and the +5V is in INT like it is suppo…
-
## Issue Description ##
Hello everyone. I want, using [documentation](https://docs.srsran.com/en/latest/usermanuals/source/srsue/source/index.html), to connect srsUE to srsENB and open5gs. Before tha…