-
I attach the Air Touch 5 communication protocol document. To me it looks like the bulk of the codes are the same with some differences in the sub type (zone control, zone status etc). Hopefully, this …
-
Hi I was wondering if you would be willing to add support for the Airtouch 2 +?
https://www.polyaire.com.au/products/control-systems/airtouch-2-plus/
I have the API but it is a bit beyond me.
-
Hi mate, great work. Just been playing around and noticed the fan level set in the integration is one level higher than the unit. Low is medium, medium is high, high is diffuse (which I don't have on …
-
I came across your integration and it's working great so far.
Will zones be added at some point to control individual rooms?
Thanks for your hard work to create this integration.
-
### 在提问之前...
- [X] 我已经搜索了现有的 issues 和 discussions
- [X] 我已经阅读了 readme 中除版本记录以外的所有内容
- [X] 我在提问题之前至少花费了 5 分钟来思考和准备
- [X] 这个问题出现在最新版的 FGO-py 上
- [X] 这个问题出现了至少3次
- [ ] 我使用过旧版的 FGO-py 并且没有出现过这个问题
…
-
Would you be open to accepting a PR to support the 2 plus or would out prefer a new library for that?
Looks like only small differences such as port, some messages and of course percentages instead o…
-
(请尽量按照下面提示内容填写，有助于我们快速定位和解决问题，感谢配合。否则直接关闭。)
**(重要！问题分类)**
* 图像识别、设备控制相关问题 -> 按下面的步骤
**描述问题bug**
脚本执行到一半就会卡住，不继续执行。
```
（在这里粘贴traceback或其他报错信息）
```
`[02:45:01][DEBUG] C:\Users\A\AppData\L…
-
I'm trying to play around with using this code to communicate with my airtouch4. Could you provide an example of how to use `airtouch4pyapi` to issue commands and retrieve info from my airtouch4?
I…
-
### The problem
The AirTouch 4 integration is reporting each zone as "climate" and not "fan" and is reporting a temperature of 154.7 deg C.
The zone should actually be a fan that allows that air dam…
-
### The problem
The temperature sensors in each Air Touch 4 climate zone are not available to be added to dashboards with the Sensor or Statistics Graph cards.
According to this Home Assistant inf…