-
### Description of the bug
When using this slicer the countdown timer on the ankermake M5 fails. The counter shows weird numbers such as the one I am looking at now, which is Time remaining 220:15:16…
-
### Description of the bug
The screenshot talk for itself.
When you are a lot piece on the plate, with organic choose.
we need to up the gap between piece to do something good.
May be in the futu…
-
-
I've been trying out these profiles for a few days and I've noticed that sometimes the output files will refuse to load on the M5, either via USB or sending via the AnkerMake slicer. When sending via …
-
I've tried to use PrusaSlicer to slice models for my Ankermake M5, using the profiles supplied here.
In the process, I've noticed that the following categories of gcode seem to register as "unknown…
-
### Application Version
5.2.1
### Platform
Windows 11, Ryzen 9 5900, 64GB DDR4, Nvidia GeForce RTX 2060, 2X ASUS 1920x1080 monitors
### Printer
Ankermake M5
### Reproduction steps
1. I Attempt…
-
It's more reliable/consistent to rely on github releases and link to those.
e.g. https://github.com/just-trey/AnkerMake-M5-Profile/releases/latest always links to the latest release.
This also a…
-
Request for new printer support:
AnkerMake M5 printer profiles / compatibility would be fantastic. The printer by Anker is very new but their slicer software is not provided for Linux and I would gre…
-
the Profile works fine in PrusaSlicer, but SuperSlicer creates an error on Startup: Preset bundle `AnkerMake` version not found in index: 0.1.0
-
When you try to send gcode from generated prusaslicer profile you will get print failed error. And it's because in the file name is comma in the layer height. Easy solution was to put dot instead. Cou…