-
### Describe the problem
As I understand it, the following parameters in config.ini determine when to switch to Float:
MAX_CELL_VOLTAGE = 3.450
FLOAT_CELL_VOLTAGE = 3.350
CVCM_ENABLE = False (…
-
Can I combine external_components_source? Can I for instance use a single ESP32 for both JBD and JK BSMes or JBD and Victron etc?
-
It would be good to have the driver use bluetooth to connect from the VenusOS device to the BMS
The latest rPi images has bluetooth enabled. A GX device will need a USB bluetooth dongle.
It will n…
-
### 路由地址
```routes
/inspirehep/authors/:id
/inspirehep/literature/:q
```
### 完整路由地址
```fullroutes
/inspirehep/authors/:id
/inspirehep/literature/:q
```
### 相关文档
https://docs.rsshub.app/routes…
-
### Describe the bug
We use a dynamic electricity tariff and control the charging and discharging of our battery via a node red flow. If the battery is to be charged to 100%, we set the minimum SoC t…
-
ant not working
```
Paste log output between BEGIN and END:
BEGIN
15:11:29 ERROR [sampling] battery1 error: non-bool switches values {'discharge': 1, 'charge': 1}
15:11:29 INFO [sampling] ba…
-
### Describe the problem
after an unspecified ammount of working time max 24 hr i get dissconnects and it refuses to reconnect unless i reboot raspberry pi
also tried dev build
### Driver versi…
-
We have the modbus spec now:
Fault codes, min/max doc, max charge/discharge current we don't map the holding registers for.
-
This 3 sensor : total energy prpduction, yesterday production and today production have wrong device class ....they have power class instead of energy
````
Logger: homeassistant.components.sensor
…
-
## What happens?
umi+qiankun项目在原本的linux服务器上可以正常运行(外网环境)，但当把父应用和子应用同样的方式部署在堡垒机的windows server 2012上后(无法访问外网)，却出现了当父应用访问子应用时，子应用的antd组件样式全部丢失，自己写的css正常。
antd组件在umi config里配置了如下：
```js
antd: {
…