-
Hi, I've been using Arduino-Makefile for a while with my own libraries. A few days ago I wanted to test Arduino Libs but it is not working.
I have .cpp file.
```
#include
void setup(){
pi…
-
As the firmware becomes more complex it would be extremely valuable to have in-circuit debugging capability to aid in firmware debugging. The goal is to used `avr-gdb` or an equivalent to get access t…
-
Debugging this for atmega2560
Got invalid page data, had to change hex_parser.c
from
```
if (strlen(buff) > 12)
{
int start = 9;
int end = strlen(buff…
-
Forward references should be allowed in expressions
- as an argument to a mnemonic or macro, and
- as an argument to any directive except conditionals, `.byte`, `.csegsize`, and `.org` (since thes…
-
For some reason mega build doesn't work without modifications to boards.txt which I assume can be built into Makefile. Makes it easier for others to contribute.
`> diff arduino-1.6.12/hardware/arduin…
Take- updated
7 years ago
-
After upgrading my mini Kossel based on ATmega2560 with the new MK4duo FW 4.4.0 the LCD displays the following error message for the EEPROM Alert:
"ATTENZIONE EEPROM Cambiata. Premere il bottone per …
-
I just had the Tuya WBR1 module which connected with atmega2560. And the issue is I am not able to change the serial port available in the MCU to communicate with the module. If I use Serial. begin th…
-
Hi,
I have installed GUIslice to be used on an ATMega2560 with a Waveshare 4.0 Inch touch display. On compiling the code I found the ILI9486 library makes calls to the SPI library ( SPI.writeByte …
-
Hello,
thanks for the esp32 code and the schematic, that really help me a lot in building my own alarm system. I'm far away from your electronic knowledge. however, I face an issue, my window sensor…
-
Hi,
I am updating firmware from wireless so I download file in sd card and change eeprom byte and doing watchdog set as per example.
wdt_enable(WDTO_500MS); // have the wdt reset the chip
…