-
What does this method do?
AXP2101_Class::setReg0x20Bit0(bool flg)
I'm asking because the AXP2101 datasheet refers to register 0x20 as PWRON status and the bits are marked RO read-only. What's the po…
-
SOC
ESP32
Lora IC
LILYGO LORA32 868/915MHz
Description
I am trying to figure out why the GPS module is not working.
I already tested the GPS reset and test firmware and the NMEA reset.
…
-
Hi
I have 2 T-Beams 1.2 with AXP2101 that work ok under usb power but doesn't under battery power. They don´t power up pressing the pwr button. The button works on usb power. With usb power they mea…
-
Hi. I am trying to run an MQTT script on one core, and read data from another i2c device on the other core, using freertos to do so.
When I try to do this, I get 'failed to initialize power' from …
-
### Bootloop running PanelTest example on M5CORES3
Bootloop running [PanelTest example](https://github.com/esp-arduino-libs/ESP32_Display_Panel/tree/master/examples/Panel/PanelTest) on M5CORES3.
…
lboue updated
5 months ago
-
In the URL https://docs.m5stack.com/en/core/CoreS3 there is a graphic representing Power Management options:
USB IN, BUS IN => BUS_OUT_EN = 0, USB_OTG_EN = 0
USB IN, BUS OUT => BUS_OUT_EN = 1, USB_O…
-
Hello,
After build, upload and upload filesystem image, I've got this on my terminal:
rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_…
-
I got a hint about problems when using a T-Beam V1.2 in combination with a SH1106 OLED. So I connected both OLED types (SH1106 and SSD1306) to the I²C bus in parallel and did several compiler runs wit…
-
The schematic for T-Beam V1.2 does not match the board (PCB).
According to the schematic (https://github.com/Xinyuan-LilyGO/LilyGo-LoRa-Series/blob/master/schematic/LilyGo_TBeam_V1.2.pdf) pin 1 of …
dj9pz updated
5 months ago
-
I would like to receive a step by step method to restore or reset the NEO M8N of the T BEAM AXP2101 with SX1262 and ESP32-DOWDQ6 V3. I've tried a lot of simple solutions such as simple reset by RST b…