-
I am trying to setup mesh edit, because now bl touch tries to probe bed out of limit where is nothing.
I tried everything but still stuck on it. Can anyone help me how to setup mesh whre bl touch pro…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
When disabling elapsed time by commenting it out, it still shows on the ender 3 v2 display. H…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
When selecting a preset color from the Lights menu the displayed colors are wrong. The config…
-
### Bug Description
filament advanced pause not working and crashes after approx 10 mins - due to screen sleeping
### Bug Timeline
new bug
### Expected behavior
pause for as long as needed to ch…
-
### Issue description
Installed BLTouch, I decided to configure Auto Bed Leveling. Configured according to the instructions.
**G28** runs well, with no errors. **G29** goes to the desired coordina…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
After #25758 (More endstops refactoring) homing doesn't work anymore. When sending G28 …
-
### Description
### Steps to reproduce
1. New firmware installed
2. click motion
3. click auto home
4. printer homes x and y
5. printer moves nozzle to center of bed and begins descend…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
If Input shapıing is enabled, the printer will home x and then y axis. Then stops resp…
-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
### Bug Description
On the newest firmware after the first layer the nozzle temp drops from 205° to 198.xx° C (Shoul…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
following the update with the new bugfix, the heads still travel at the same time at th…