-
s6-rc: info: service s6rc-oneshot-runner: starting
s6-rc: info: service s6rc-oneshot-runner successfully started
s6-rc: info: service fix-attrs: starting
s6-rc: info: service fix-attrs successfully…
-
Hello, I uploaded the following code for ESP8266 D1 mini and unfortunately nothing works - what am I doing wrong?
```
substitutions:
name: jk-bms
device_description: "Monitor a JK-BMS via UA…
-
I have this version installed esp32-example-advanced-multiple-uarts.yaml.
when I disconnect and then connect the power from esp, then the data exchange is lost. The only option to start data excha…
-
It would be good to have the driver use bluetooth to connect from the VenusOS device to the BMS
The latest rPi images has bluetooth enabled. A GX device will need a USB bluetooth dongle.
It will n…
-
Thank you for the great work on adding support for the Neey balancer.
It works flawless for 1 unit at the time. I would like to connect up to 4 units via BT.
But I cannot seem to figure out how i …
-
### Describe the problem
I have tried to get my battery to be recognized with no success. Have tried on RPi 3 and RPi 4 with same results. On each I have tried 2 different 485 converters which I ha…
-
can you add the reset buton ?
i have tried it to add id but it doesnt work.
button:
- platform: restart
name: "ESP_JBD_reset"
-
I am trying to Program a NodeMCU32S to read the Neey Active Balancer and not having any luck.
Could someone point me in the right direction?
I am using this code....
```
substitutions:
name…
-
Hi, I'm new to ESPHome and Home Assistant in general. I tried following the tutorials in the ESPHome docs and built my config using the example files here, but I cannot get the device to start properl…
-
Read charge/discharge limits from the BMS settings instead of using a hard coded value.
This command is not in the LTT protocol document, but the app does set these so it should be possible to read.
…