-
How to set the altitude and the real pressure?
I use nodemcu latest.bin error not enough memory
nodemcu_20150123.bin working fine.
Sorry for my english
-
When trying to launch a simple barometer read it fails on:
RangeError: Trying to access beyond buffer length
at checkOffset (buffer.js:582:11)
at Buffer.readUInt8 (buffer.js:588:5)
at Gali…
-
When I run the 'sudo python Pioneer600.py' command, I get the following errors and the OLED display stays blank:
Traceback (most recent call last):
File "Pioneer600.py", line 276, in
bmp = B…
-
Hello,
I am trying to use the BMP180 to read temperature and pressure on ESP8266.
When I try to instantiate the object I got this error:
`>>> bus = I2C(scl=Pin(12), sda=Pin(13), freq=100000)
>>…
-
Hello @enjoyneering
Use `BMP180` breadboard `GY-68` `I2C adress 0x77`
![Датчик давления и температуры BMP180 ](https://github.com/enjoyneering/BMP180/assets/1788098/7be750ae-20f4-4b1e-bd54-ee82c9003…
-
Nettigo Pro hardware with a BMP180 turns out to be having too high pressure readings.
Another BMP280 at 0.1 kilometer distance is: 1019.6
The Nettigo Pro hardware met BMP180 is at: 1061.2
Other p…
-
As I see, you are reading a byte value for MSB, LSB, XLSB to compose the pressure. In Java they are signed. The values are not meant to be signed, so it helps to change the following lines to get it w…
-
The uncompensated temperature of the BMP180 is incorrectly converted to a 16-bit signed value, instead of a 32-bit signed value (long). Since the data is 16-bits wide and can therefore not be negative…
-
Using my breadboard build and replacing with the new offbrand, but highly rated SD card module. Worked for 12 minutes using the source code from my original sketch, then couldn't see the SD card. In f…
-
Sensor: bmp180
```
$ uname -a
Linux raspberrypi 4.19.75-v7+ #1270 SMP Tue Sep 24 18:45:11 BST 2019 armv7l GNU/Linux
```
Model: RPI 2B+
rpio: 1.3.0
Example is simple `i2c.js`:
```
var…