-
Cable chain is designed to support high flex rated cables. Igus makes a series of cables for this application called Chainflex. Cable chain was never designed for individual conductors as Voron has al…
-
I write a KISS client for direwolf and fldigi. I have this weird problem with direwolf, that when the soundcard is connect with some devices (not all though, a direct link between two computers (mic->…
-
**Describe the bug**
The CAN samples were renamed but a couple of entries in the CAN documentation was missed.
**To Reproduce**
Steps to reproduce the behavior:
1. `boards/shields/mcp2515/doc/in…
-
I'm just setting up 48V lifepo4 with diymbs and Pip-MAX 8KW inverter/charger, which supports Pylontech bms/battery modules. I would like to add if possible BMS Pylontech support much as you have done …
-
Hello everyone!
Referring to the MAX31855 board, the signed value of the temperature is given by 14bits bits [31:18].
Those 14 bits are sent out MSB first, and the first bit is the sign bit.
Th…
-
Hi, ı want to receive messages from arduino mega with canbus on stm32f407. When upload code it says CAN initilization is succesfull but doesnt receive anything. Arduino prints sending is succesfull. B…
-
OS version: win7
Arduino IDE version: 1.6/1.8
Arduino Espressif sdk 2.0.2
MFRC522 Library version: 1.4.10
Arduino device: ESP32
MFRC522 device: RFID mini
https://nl.banggood.com/3pcs-RFID-Read…
-
Hi @chrisjoyce911 ..
I am wondering if you are going to modify the library you created for handling the update with esp32 device connected with internet
with an ethernet cable.
Are you planning t…
-
Hello,
I am having an issue with receiving CAN messages sent from an Arduino (using [this MCP2515 library](https://github.com/autowp/arduino-mcp2515)) on a Raspberry Pi. The Arduinos have no probl…
-
I am running multi-mcu probing in a setup with a couple of separate SAMD21 mcu boards - and occasionally I get a "Communication timeout during homing probe" error during a probe run. USB communication…