-
Bosch has updated the library for BSEC and the latest version is v1.4.7.2.
Sketch **catena4460_bsec_ulp.ino** has been written based on BSEC software v1.4.6.0, so the sketch has to be updated to w…
-
As per STM32l0 datasheet, in Standby mode, the device used to reinitialize during wake up from sleep.
> After waking up from Standby mode, program execution restarts in the same way as after a
> Res…
-
We have tested the latest “Catena-Arduino-Platform” with Catena devices.
The latest library works well with all devices except 4612 and 4801.
For Catena 4612 and 4801, we find below issues:
i. Lo…
-
From @cstratton (thanks Chris!)
https://github.com/mcci-catena/arduino-lmic/blob/a86a87ec9c131818172a21c6e52c080ee4917181/src/lmic/radio.c#L267
> this should be 0x0C, not 0xC0.
More context:
…
-
We tested Catena boards 4612 and 4801 at lower System Clocks (no USB) **2.097 MHz** and **4.194 MHz**. We see that the ReadAnalog failed with these two system clocks.
Further, we see function call …
-
Please include https://github.com/mcci-catena/Catena-Arduino-Platform in the list, thanks.
-
In the Catena wing support, we have:
https://github.com/mcci-catena/Catena-Arduino-Platform/blob/163b63653a439375a61029b9e1d4e029a1c309de/src/lib/samd/catenawingfram2k/CatenaWingFram2k_begin.cpp#L…
-
_Originally posted by @terrillmoore in https://github.com/mcci-catena/Catena-Arduino-Platform/pull/84_
-
Hi
Thanks for the library, this is much easier to maintain than lmic code.
I have a TTGO ESP32 lora connecting to TTN with the limc code but the same settings don't work with this lib. It compile …
-
This library doesn't have much in the way of examples, because I always have used it with [catena-arduino-platform](https://github.com/mcci-catena/Catena-Arduino-Platform). But several people have poi…