-
Hello,
I am currently trying to flash the latest router firmware:
https://github.com/Koenkk/Z-Stack-firmware/blob/develop/router/Z-Stack_3.x.0/bin/CC1352P2_CC2652P_launchpad_router_20221102.zip…
-
Finally I received the Aqara Roller Shade Driver E1, but it seems this one doesn't work out of the box with zigbee2mqtt.
I'm using zigbee2mqtt 1.22.0-dev. The device joins the network and is intervie…
-
Hello to the community,
I'm having a problem / bug with the zigbee2mqtt software. The situation is the following:
## What happened
I'm using the [IKEA LED1624G9](https://www.zigbee2mqtt.i…
-
Hi,
I have recently found this condition, running latest dev branch using a ZZH. I can only pair or re-pair devices if I’m very close to the co-ordinatior. Is there any reason for this? I’v…
-
### What happened?
I have a network with about 12 thermostates, and with with all of them updating the system every second they flood the adapter and after a while make it crash. When this happends t…
-
### What happened?
Hello:
When I try to flash the new firmware with TI Flash Programmer 2 I get this message in Log:
>Initiate access to target: COM4 using 2-pin cJTAG.
>Reading file: C:/CC265…
-
### What happened?
Zigbee2mqtt doenst start properly.
No error in the log.
Frontend doenst work.
No Device avaible in mqtt.
Fix: Revertiung back to 1.27.0
_Originally posted by @b-reich …
-
### What happened?
Light not turning on at full brightness, even within Z2M control panel itself. Light shows full brightness in control panel and MQTT message but it isn't. Manually adjusting slider…
-
## What happened
Battery level dropped to 4% so I replaced the battery last week even though device was still working. I've had this device since Sept 20 and it was okay until recently when …
-
### What happened?
My IKEA devices are leaving the network shortly after pairing, the devices are supported:
https://www.zigbee2mqtt.io/devices/E2001_E2002.html - have 2 buttons, one has the probl…