-
Hi
Really like your project!
I'm trying to use it for a MacroPad I bought on Aliexpress. Its almost indentical to the one you have created. Only difference is that the key pins and knob pins are i…
-
Hello! First of all, thank you for creating this awesome firmware. Honestly, it seems easier to use than the other ones I have seen.
I wanted to ask if it would be possible (hardware-wise) to port …
-
Hello,
Using ch554 chip and code upload possible at v0.0.17.
Compile for ch552 and upload to ch554 no problem for vnproch55x application.
But error at v0.0.18 and v0.0.19.
Detected MCU …
mcu23 updated
5 months ago
-
Can you tell me if this is normal? I can compile other projects with different libraries, but I cant compile the example of this lib:
C:\Users\*****\Desktop\arduino-1.8.19\portable\sketchbook\libra…
-
Hi,
When I setup a watchdog like this:
SAFE_MOD = 0x55; //enter safe mode
SAFE_MOD = 0xAA; //continued
GLOBAL_CFG |= bWDOG_EN; //start watchdog
SAFE_MOD = 0x00; …
-
Curently the library only support 256 bytes of data, so only 85 + 1/3 Leds being controlled
if any N number larger than 256, only N-256 Leds being controlled from the start of the strip
-
@RoboDurden @AILIFE4798
Just wanted to create an area were we can discuss progress wiki.
-
Hello everyone, I'm building my git hub project in a new fresh formatted pc, I don't understand why I get this error:
All the missing file exist...
No antivirus running
```
Building in relea…
-
I cannot flash my Tang Nano 9K with a default [led example project provided by Sipeed](https://github.com/sipeed/TangNano-9K-example/tree/main/led).
I have fully compiled the bitstream file and use…
-
When editing the `USBDeviceCfg` function in USBhandler.c to use Low Speed USB, the communication does not work. I've been trying to add support for lower clock frequencies down to 1.5MHz so others can…