-
I use "Silicon Labs CP210x USB to UART Bridge (COM6)".
/////////////////////////////////////////////////////////////////////////////////////////////////////////
step1. connect Serialport - success…
-
### Is this a new Bug?
- [X] I checkd that the bug hasn't been reported before
### Package Name
synocli-kernel
### Package Version
1.1-8
### Device Model
DS3615xs
### Device Architecture
x86_…
-
Hi!
I compiled whit success all project, and when i run
ec2test-any --port=USB --debug
i got the message bellow
*********************************************************************
* WARN…
-
I am running the cm160 binary in a non demon mode like: ./cm160 just to check the data coming in. If I terminate this, and try to restart it, I get the following:
zoell@srv02:~/eagle-owl/src$ sudo ./…
zoell updated
7 years ago
-
現在は"CP2102"のデバイスを見つけて接続する。
同時に複数のCP2102のデバイスがある場合に対応するため、rulesを書く
参考
```
P: /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.2/1-10.2:1.0/ttyUSB0/tty/ttyUSB0
N: ttyUSB0
S: serial/by-id/usb-Sili…
-
Hi,
im trying to get the hmip-rfusb stick working on linux.
OS: Debian 9.6
commands to init:
**modprobe cp210x
echo "1b1f c020" >/sys/bus/usb-serial/drivers/cp210x/new_id**
**lsusb -t:*…
-
I'm trying to use cpsumoncli with Corsair AX1500i - however, /dev/ttyUSB0 is not even created when I connect the PSU. lsusb shows the power supply.
lsusb -v:
```Bus 001 Device 005: ID 1b1c:1c0…
-
Please, enable (as a module) `CONFIG_USB_SERIAL` in kernel config.
My use case: I installed Home Assistant on my Odroid U3+, and I'm unable to use a ZigBee dongle (which uses a serial interface).
…
meden updated
2 years ago
-
PC OS: Windows 8.1
Device: NodeMCU ESP32 (CP210x) https://ae01.alicdn.com/kf/HLB1NvxzQMHqK1RjSZJnq6zNLpXav/ESP-12E-CH340-NodeMcu-v3-ESP32-D1MINI-Lua.jpg_Q90.jpg_.webp
It seems the device is in boo…
-
### Category
Hardware Compatibility
### Hardware
Heltec V3
### Firmware Version
None
### Description
Brand new Heltec V3 off of Amazon. Tried the web flasher initially without success. Python…