-
### Summary:
The opening for the 8 way comm switch isn't sized to restrict to 4 way movement.
### Expected Results/How It Should Work:
Comm switch movement should be restricted to just 4 directio…
-
-
My 3.5 inch TFT shows strange characters in the place of special characters.
i know that there is a closed issue in which someone provided this:
BRANCH_L, arrow to the right, 0xBB
BRANCH_R, arr…
-
### Summary:
The DZUS connectors in the drawing call for the face of the screws to be FS37038 (Black) but the appearance of the face is Steel
### Expected Results/How It Should Work:
Specificatio…
-
[Link to dcs-skunkworks issue](https://github.com/DCS-Skunkworks/dcs-bios/issues/134#issuecomment-1986393967)
Current workaround: Use HID to trigger the switch in game.
-
So far I managed to get the DED, Chaff/Flare counter and UHF backup on my OLEDS.
However, I cannot find any line for the last thing I need in the F16C control reference: Pilot Fault List Display.
…
-
### Summary:
Current cables float around - running the risk if pulling at legs of switches and pots. Suggest adding a small saddle to hold in place. Also, lower priority - could we increase the dep…
-
### Summary:
The light and legend plates do not extend over a backplate cutout on the landing gear panel. LED backlighing for the DN legend will likely blead out the hole.
### Expected Results/Ho…
-
I'm trying to use some encoders that are two steps per detent vs. the typical four.
In the documentation, it indicates that you can add after the declaration to work with a two-step encoder, e.g. …
-
Been trying to get a 2-way switch working on the MiG-15 for the gun trigger safety switch.
Because if you have the stick hidden there is no way to see what the status of the safety switch is unless y…