-
it is possible to increase the maximum production (today daily production ? . Currently it looks as if the max was set to 100kWh.
![Zrzut ekranu 2024-04-30 092649](https://github.com/StephanJoubert/h…
-
I just installed solarman and configured my device using deye_2mppt.yaml.
I don't get any values and I saw some issues when reinstalling or waiting a bit helped. I tried that.
But I get these erro…
-
Will it blend?
-
Hey,
I used the deye_2mppt.yaml at the moment but with deye_4mppt.yaml it is the same
Inverter: DEYE SUN1000G3
Firmware: MW3_16U_5406_1.53
With those definitions, the "Running Status" is "Fa…
-
Hi Hypfer,
thanks for this awesome project. I'm running the dummy cloud and for some reason the "grid energy today" value seems to be decreasing? This also happens for the "Grid energy total" (see sc…
-
Good evening all. Looking guidance. Missing the following values.
1. I use the smart load for my geyser. But the smart load says look up. wondering what I need to edit in order to fix this issue.
2…
-
Hello,
I try to init this integration for my deye controller SN : 39XXXXXXXX but it doesn't work :/
in this doc ->
> Check the version of the solarman logger. If the serial number starts w…
-
The integration goes from working perfectly to status_connection: disconnected without any interaction from my side.
In the HA logs I find this:
WARNING (SyncWorker_2) [custom_components.solarman…
-
Hi there.
Ive installed the integration and tried to make the connection.
Homeassistant makes a device with 50 entities that are all Unknown values.
There are no bad logs in Homeassistant.
Devi…
-
Currently supported inverters are:
- Victron
GoodWe has been Disabled due to bad webpage design, and also the web data being inconsistent.
Inverters planning to be added:
- Sunsync
- Lu…