-
Hi,
After upgrading to v01-1.2.5, I've experimented a very strange bug with my Sigma R16.
Sometime, **during a print**, the "unload filament" procedure seem to start for no reason.
The extruder…
-
Currently, Cxbx uses inconsistent folders and file names.
For this issue, gather all folder and file names,
Determine the most sensible variant for each,
Update the code to use this outcome.
Examples…
-
Of course thanks so much for your work on this, it's a hugely useful feature.
I'm in the process of adding basic support for SDHC cards, which seem to be all that is available these days.
I have a…
-
## Background
I ordered a Starbook MK V last may so I'm not sure if I own a V or VI (it has a fingerprint reader if that helps). While I ordered it with Coreboot, it came with American Megatrends. …
3lpsy updated
2 weeks ago
-
### Describe the bug
I am using a Revolution Pi Connect S, which is based on CM4-S. I have flashed a bootloader config to enable BCM-USB-MSD boot. With bootloader versions up to `pieeprom-2024-04-1…
-
Hello everybody,I have a problem with my delta printer and I would be very grateful if you help me
to solve it.
I'm using Arduino due + RADDS with Repetier firmware.
The problem started when the …
mj996 updated
4 years ago
-
* ~~6502 second processor~~ (anything non-6502 is out of scope, at least currently)
* Serial port (to/from file/clipboard/socket/etc.)
* ~~Parallel port~~ (ditto)
* ~~Joysticks~~
* Speech
* 8271
…
-
hello i am using a alpha awus036nha in ubuntu with 3.18 kernel causes a lot of disconnects where the whole driver reloads itself and the usb layer is deinitialized
here is the dmesg
[134330.226799]…
-
Plan:
- list of supported cards (wiki)
- pre-compiled applets for supported cards (GPShell uploader)
petrs updated
11 years ago
-
Hi,
I have a random Problem powering up my 9XR-PRO:
from time to time it wont boot up, it Shows the Splash Screen but lighter and if i Switch the power Switch to off it wont go off, it takes about 10…