-
Please add support for D2-11-02 for Thermokon SR06. Compared to D2-11-01 that is already tested and implemented this would add the reading of humidity value.
-
tracking #62
-
I put an Enocean TCM 310 on my PI 4. LED lights up green. the plug in installed. what do I have to do now so that my switches are recognized?
-
Hello,
for a couple of days my node red input stopped delivering messages.
I use two GIRA 242203 EnOcean radio wall transmitter and an enocean usb 300 stick.
The input box is green and flash…
-
Hi @RomeHein
Many thank for your work !
It allowed me to integrate my cover in my home assistant (docker) !
Can i have some explanation on adding a soft remote ?
I used the example in the README…
-
This EEP consists of three types:
- Type A: device requests data
- Type B: controller sends data
- Type C: device sends data
So the device can send type A or C, and the controller has to answe…
-
Hello,
When the next frame is received, the EnOcean-in node will stop and will no longer receive data.
Is there any way around it?
---data----
GP_TI (Teach-In):
rawByte: "a52f05601204ad0160429…
-
Hi,
First thank you all for the great work!
Just a question: is it possible to enable repeater mode for the raspi module or USB stick with some message?
-
I get errors when starting Node-RED 1.06 with two other nodes as soon as I install the enocean node and restart Node-RED.
My config:
Node-RED Version: v1.0.6
Node.js Version: v12.16.3
Linux 5…
-
Hi Daniel
I monitor the power consumption of my heat pump using a couple of Eltako DSZ14DRS'. This works fine for most of the telegrams arriving using EEP A5-12-01. However every 10 minutes these m…