-
### Board
ESP32-S3-DevKitC-1-N-32R8V
### Device Description
ESP32-S3-DevKitC with only USB serial cable attached.
### Hardware Configuration
n/a other than onboard RGB used in sketch.
…
-
### LVGL version
v8.4.0
### What happened?
Hi, When I create a simple roller and scroll it vertically then It scrolls the whole screen around. I use ESP32-S3. The first picture shows how it s…
-
### Board
ESP32S3 Dev Module, ESP32 Dev Module
### Device Description
The issue happens while compiling, a dev board is not required to reproduce the issue.
### Version
2.0.12
### ID…
-
### The problem
Using a ESP32-S3-DevKitC-1-N32R8V, that uses a ESP32-S3-WROOM-2-N32R8V module, that is a ESP32-S3R8V, 32MB Octal SPI Flash, 8MB Octal SPI PSRAM, 1.8V SPI.
Programming a Flash siz…
-
### Hi there !
i tryed myself but only get blank white screens
i think for some dev in here it's a few minutes to fix.
*some more info :*
*from smartdisplay-demo :*
"build": {
"ardui…
-
# ESP32-P4 support status in ESP-IDF
ESP-IDF v5.3, currently in development, will include initial support for the mass production version of the ESP32-P4 chip.
In the list below, supported featu…
-
### The problem
When using E1.31 on WLAN connected ESP8266 for addressable led strip with Hyperion NG. Updating ESPHome to V2023.6.0 or later breaks the E1.31 integration, probably by https://github.…
-
### Is your feature request related to a problem?
- https://github.com/espressif/qemu/releases/tag/esp-develop-9.0.0-20240606
```
I (2142) boot: ESP-IDF v5.3.1-dirty 2nd stage bootloader
I (2143) …
-
hi.....i got the following error on my terminal after successfully building and flashing the code can you please assist me regarding the same?
I (258) cpu_start: Max chip rev: v0.99
I (263) …
-
Use ESPs LEDC subsystem or other fitting busses to add RGB LED support. This is needed for easy visual feedback whether a transaction has been registered. We should aim for at least a simple red/green…