-
The [Geekworm X1007](https://wiki.geekworm.com/X1007) could be interesting for a simple two 2,5" drive NAS using the standard PSU (27W).
![600px-X1007-V1 1-UPSIDE](https://github.com/geerlingguy/r…
-
Hi,
I built a core-image-minimal using the scarthgap from meta-freescale and flashed the resultant wic.gz into the SD card.
The kernel boots, but the SD card is not detected.
Does anyone have…
-
反馈bug/问题模板，提建议请删除
## 1.关于你要提交的问题
Q：是否搜索了issue (使用 "x" 选择)
* [ ] 没有类似的issue
## 2. 详细叙述
### (1) 具体问题
A：启动后查看Turbo ACC 网络加速设置，先能看到流量分载未运行其他正常，等一会儿所有都是正在收集数据...
### (2) 路由器型号和固件版本
A：x8…
-
[Amazon link](https://amzn.to/3nCG9Id)
Product Image:
Dmesg:
```[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 5.15.0-rc6-v8+ (root@f066bcf…
-
### Describe the bug
Hi!
I have built a yocto-image for my CM4, and I'm using linux 5.15.32 from this repository. The CM4's USB2 lines are connected to a FE1.1S 4port hub.
I am normally seeing …
-
Hey,
The last couple of days (weeks?!) I have been working on bringing up USB3 on the AXU2CG.
I can't believe that USB support is actually working in the 2020.1 reference implementation from Ali…
-
## Platform
I’m using:
* gokrazy/rpi3b
* gokrazy/rpi3b+
* gokrazy/rpi4b
* ... and also gokrazy/rpi400
## Observed behavior
The Raspberry Pi 400 seems to mostly work. Everything except w…
-
PON stick: FS XGS-ONU-25-20NI with rewrited 10G EPON firmware.
This problem occurs after accidental broke and repair of the PON fiber.
The cold connector broke while I'm moving my rack and streche…
-
Hi esp
I loaded the driver.But there's no device in sight.What's going on?
root@maaxboard8ulp:~/test#
root@maaxboard8ulp:~/test#
root@maaxboard8ulp:~/test#
root@maaxboard8ulp:~/test# insmod es…
-
I have a raspberry pi 5 and a pi camera (IMX296). I cannot get them to work with libcamera c++ api (I installed it with ```apt install libcamera-dev```). It shows one frame and then I get the followin…