-
**Describe the bug**
The manual force idle function does not pause the battery from discharging - I expected that the battery would neither charge/discharge and that any load would be met by the grid…
-
Speaking to GE, a setting had been changed as part of a firmware update that caused me problems with my setup. The support desk were very helpful, and reverted it, which was then tested and found to b…
dbrb2 updated
7 months ago
-
### The problem
Error appears in log that the sensor is marked as increasing, but it is consumption today, so is reset at midnight.
### What version of Home Assistant Core has the issue?
2024.5.1
…
-
**Original Bug Report no 565**
Single AC3 Inverter Economy 7 setup no export.
When low power mode is selected it operates correctly but is sending repeated commands to the Inverter as shown in the G…
-
This code is in use in another givenergy integration, which is broken for us due to the missing serial number prefix. Apparently the other integration requires a release on this in order to use the fi…
-
Doesn't seem like I can get this to work at all. I have a 9.5kwh battery with a separate Gen1 inverter.
Logs as follows
2023-12-18 09:08:38,625 - startup - [CRITICAL] - HA MQTT Service has been…
-
Currently via REST you can only force a entire refresh of the register set (runAll), but you can't read a particular register
Could we have it so that you can read a register directly?
Being abl…
-
**Describe the bug**
'load actual' in predbat is much higher than the GivTCP sensor value.
History of predbat.load_energy_h0
![image](https://github.com/springfall2008/batpred/assets/58569471/04643…
-
* GivEnergy Modbus version: givenergy-modbus-0.10.1
* Python version: 3.11
* Operating System: MacOS 12.6.2
### Description
Describe what you were trying to get done.
Run this simple pytho…
-
I have two gen 1 hybrids. One with a battery (inverter 2) and one without (inverter 1).
Both were working fine this morning and then stopped receiving updates from inverter 2 in givtcp.
It didn…
gcoan updated
2 months ago