-
**Describe the bug**
Long exposures (above 10s) on Canon DSLR are very unreliable. It is very obvious on my 6D but also 40D suffers similar problems. The capture hangs, repeats multiple times etc.
…
-
Hi,
I used in Windows and Ubuntu and I got the same error.
```
$ python -m pip install -U -r requirements.txt
Collecting gphoto2==2.0.0 (from -r requirements.txt (line 1))
Using cached http…
-
Octolapse Version: 0.4.1
OctoPrint Version: 1.5.3
Diagnostic Logging was Enabled: YES
**What i did:**
I installed Octolapse and set it up with gphoto2 for external Camera use.
**What sho…
-
Hello I use octoprint with octolapse which works wonderfully but i would like to know how to keep the jpg in the sd card of the camera? I tried to add --keep in the tutorial script but nothing thank y…
-
Hello,
I have a problem during the snapshot, even at 5000ms delay, the image is taken too early. Is there a solution for the snapshot to be done later when the extruder is in final position ?
-
Fill in fields below. If you don't know how, leave it free.
**Name of the camera*
Canon R8
Use the Marketing name.
EOS Canon R8
**USB IDs**
e.g. by running: lsusb
Bus 002 Device 002: ID…
-
Indigo_server on Raspbian stretch on RPI3b+ Indigo_server version is 2.0-95
When using the Internal Web server on port 7624 it is not possible to image with exp time of over 55 secs - image is taken …
-
**Describe the bug**
gphoto2 is able to capture a image from the Nikon Z 7 but the image is not in focus.
**Name the camera**
gphoto2 --auto-detect
Model Port …
-
I installed the Mac app but was hit with a scary "this application is damaged, you should move it to the bin" message.
Looks like this is because it isn't signed, and the only workaround is to use …
-
**Describe the bug**
First capture using `gphoto2 --capture-image-and-download` works fine. All subsequent captures fail with `PTP Device Busy` error.
**Name the camera**
Canon EOS 4000D
**l…