-
There is a current supply issue with STM32F030CCT6 affecting most ST suppliers. The only chips available are changing hands for $4+ a chip as opposed to $0.75 ish at 2k pcs.
Think it is worth explo…
-
# esp32p4 support status
- Low Power System
- ✅ Low Power Core (RISC-V)
- ❗ Low-power ADC (IDF-6875)
- ❗ Low-power GPIO (IDF-7536)
- ❗ Low-power I2C Master (IDF-7540)
- ❗ Low-power I…
-
Simple hello world with this platform is not compiling.
My config:
[env:huzzah]
platform = custom8266
board = huzzah
framework = esp8266-rtos-sdk
upload_speed = 921600
monitor_speed = 74880
I…
-
I've recently starting using the PiJuice HAT for a project. I am using Raspberry Pi OS on a Pi 4B. The only other hardware attached is a HQ Camera module. I'm using the default battery (1820mAh).
T…
-
Is it possible to use xboot on ATmega32u4?
-
Please write a sketch for attiny85 firmware upload by air.
There are many sketches of flashing esp8266 itself on wifi. .
Task: esp8266 get the firmware via wifi and upload it to your slave ittin…
-
Acer TravelMate B.
Related to iichid? When it is working then both `iichid.ko` and `iicbus.ko` are loaded.
Broken as of 0cdf69f
It was still working e.g., in 28471f0
-
#### 1. Embedded C, ARM Assembly
#### 2. MCU ( Ardunio Uno, STM32F4XXX )
#### 3. OS Concept
#### 4. One CPUSS architecture ( ARM or RISC-V) [ As you are doing all the stuff for the cpu computation …
-
Quoth @quorten in #4:
> Just wanted to comment, I also really like the idea of an board variant with an RTC on it too. Probably the best way to do this is with a single AVR microcontroller on the …
-
There were multiple requests on wireless RGB with CLP, if this is even possible and how to do it. Because CLP is modular it's simple to use it with existing wireless technologies. It is only required …