-
@plaes said that X1, X2, Y1 and Y2 pins of CHIP which are intended for touchscreen can be used as general purpose ADC-s. We could expose these pins to be used for eg Sharp GP2Y0A21YK0F distance sensor…
-
Hi! I'm working with an STM32MP157F-DK2, it has a microprocessor A7 that's running Linux. I need to read the voltage of one of the pins. The pin configuration for the Analogical to Digital conversion …
-
Hi
you tested fedora, I tried a few things (still testing) on pop!_os 22.04, thought it would be interesting to see the difference as you tested Fedora. Hope it's ok?
Everything seems to work ou…
-
It's nice to see an example for the MAX11300. I'm struggling a bit right now.
The kernel module compiles, but I see no iio devices. I guess the dtbo is missing and
dtbc doesn't want to compile.
I…
-
The rot8 configuration in the sway config file does not work, likely because x-file and y-file are not valid arguments apparently.
This is because the git clone command doesn't clone the forked ver…
-
Hi Kevin
Being testing the latest Venus candiate version 2.90.12 on a raspi4 B+ Ver 1.4 PCB and its all works OK. only thing not working or missing is the analog settings page.
PageSettingsio.qml …
-
Can you teach me how to modify the HAL config(or code) so that HAL can recognize the newly added sensor driver?
For example :
If I add a sensor driver under the kernel/iio folder which name is call…
-
i am using mraa on Raspberry PI with Grove Kit.
I see occasional failures when I use mraa_aio_read (read_status = -1) and mraa_gpio_write (status = MRAA_ERROR_UNSPECIFIED). I have several writes to…
-
/dev/mali0 0666 system system
/dev/ion 0666 system system
/dev/ump 0666 system graphics
/dev/exynos-mem 0660 system …
-
While using an ACME CAPE for long running experiments, it happens quite frequently that we need to reboot the device because of iio-capture failing to write the `in_oversampling_ratio` attribute of a …