-
This is arguably minor, but I thought it worth flagging up. It also applies to bytes objects.
```python
MicroPython v1.8.7-893-g46b849a on 2017-06-22; linux version
Use Ctrl-D to exit, Ctrl-E for p…
-
I want to switch ON a MOSFET when the OUT Pin of RCWL 0516 goes High and switch off MOSFET when it's Low.
I connected the OUT pin directly to the gate of a MOSFET, but the MOSFET is not completely …
-
in the variants.h file, PINS_COUNT says it should be the number of pins in the array:
```
// Number of pins defined in PinDescription array
#define PINS_COUNT (26u)
```
However, this ra…
-
Hi
I have trying to run APA102 on my ItsyBitsy nRF52840 Express board and custom nRF52840 BBoard but no success
I have 104 LEDs (4x26) and trying to get it working but code continue after 52 eve…
-
**Firmware**
```python
Adafruit CircuitPython 6.1.0 on 2021-01-21; Adafruit ItsyBitsy M4 Express with samd51g19
```
**Code/REPL**
```python
import board, busio, ps2io
kbd = ps…
-
The AHRS library appears to incorrectly compute the z-axis of the gravity vector for at least the Madgwick and potentially the Mahony filter.
This issue pertains to the library, not specific hardwa…
rmull updated
10 months ago
-
**[Original report](https://bitbucket.org/geostorm/eodag/issue/5) by Mickaël Savinaud (Bitbucket: [savmickael](https://bitbucket.org/savmickael), GitHub: [savmickael](https://github.com/savmickael)).*…
-
I've had noise issues with the Itsy Bitsy M0 Express and have boiled it done to attaching the MSA301 Accelerometer. I can attach neopixels, buttons, etc. but as soon as I attach the accelerometer I ge…
-
### CircuitPython version
```python
since PR#9325
```
### Code/REPL
```python
def send_file_to_host(src_filename, dst_file, filesize, buf_size):
import sys
import binascii
try:
with …
-
### Operating System
Linux
### INFO_UF2.TXT
This one was working successfully:
```
UF2 Bootloader 0.8.3 lib/nrfx (v2.0.0) lib/tinyusb (0.12.0-145-g9775e7691) lib/uf2 (remotes/origin/configu…