-
If you're familiar with Li-Ion (or LiFePo) batteries, you are probably aware that if you use your laptop most of the time *plugged in*, having your battery at 100% all the time will **affect the longe…
-
Capture schematic in KiCad.
-
If MSP_OSD_NCELLS = 0 and OSD_CELL_COUNT=0 (autodetection cell count)
The number of battery cells is recalculated during the flight. This leads to an error in displaying the voltage of one cell on th…
-
-
I've been using it as a USB charger for a few months now, and while it works well, it never reports that charging is done.
I've had a 10500mAh Li-Ion battery on charge for five days solid, and it's…
-
**- Current Shunt resistors**
You instruct in readme to remove 6 of the 4Mohm resistors.
In the Battery Gallery it looks you use the following BMS (single side)
SKU: SP15S001V1-12S-Li ion-30A
…
-
Most online available 3D printing models aren't efficient enough to be used on battery power well. Battery power is one of the main limiting points
Blower impeller is the white thingy in the pictur…
bbozo updated
4 years ago
-
Hi,
I've been having issues setting up my MoPi 2 with a raspberry pi 3.
I'm trying to use a 2 cell Li-ion battery to power it. I have finally gotten the pi to accept the battery settings and not…
afgoo updated
4 years ago
-
Hello BotoX,
I have a faulty battery with some dead cells due to a faulty bms.
I want to rebuild the 10S3P original battery without change the cell config, just rebuilt it. But I have the doubt choo…
-
**Is your feature request related to a problem? Please describe.**
We're looking at using Sage in relation to a project on electrolyte design for li-ion batteries. Currently the force field doesn't h…