-
Using CM4 /w M5P having troubles configuring cameras and displays at the same time. Even with the known issue with Klipperscreen & the cam interface at the same time I tried to work around it but ther…
-
Hi,
I have got the 5 Inch Display to work with changing HDMI Parameters in my fex config:
> [disp_init]
> disp_init_enable = 1
> disp_mode = 0
> screen0_output_type = 3
> screen0_output_mod…
-
Hi
Installed lcd35-show and lost working startx and xinit in latist shell only raspbian lite
Just returns no display error.
The install of xorg was tested working before install of Lcd35-show with…
-
**Console Configuration:** Nintedo DS Lite with Gameboy Macro Mod and r4sdhc. Gameboy Macro Setting enabled
**TWiLight Menu++ Version:** v23.2.0
**TWiLight Menu++ Theme:** DSI
### Expected behavi…
-
**What doesn't work?**
A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]
7' Inch Raspberry Pi Touchscreen, touch display not responsive.
**What did you al…
-
Just downloaded Lite version and can't do anything at all: no button reacts to a touch. The only thing I managed to do is switch between Continue Watching and Recently Added, but even tapping the form…
-
#### What were you doing?
I use a custom touchscreen panel attached to HDMI. It works by adding these lines to /boot/config.txt:
hdmi_drive=1
hdmi_group=2
hdmi_mode=87
hdmi_timings=480 0 0 20…
-
### Prerequisites
Não tenho um readme
### Description
I tried to install the system using a memory card but I couldn't find it in Windows Explorer or in Windows Disk Manager.
When installing…
-
Greetings!
Do you have a list of supported XEPs?
Do you support PubSub? (i.e. XEP-0060: Publish-Subscribe)
Thanks in advance,
Schimon
-
Hi,
using a TWIN X-Lite S with ETHOS 1.4.5. It is not easy to move through the screens shown. It seems that you have to reach the middle of the screen, so it is not possible to use the thumb and ho…