-
Hi there. can someone help me there i just can't get any further.
`> Executing task: C:\Users\Danjo\.platformio\penv\Scripts\platformio.exe run <
Processing LPC1768 (platform: https://github.com…
-
Hi
I installed a BL Touch (from Antclabs) and the Micro Swiss Direct Drive Extruder Setup. Now i need to change the #define X_MIN_POS and #define Y_MIN_POS to #define X_MIN_POS -5 and #define Y_MIN_P…
-
Hi
Has anyone an idea how to get work the E3 turbo with Ender 3v2 dwin display?
EDIT:
yes the e3 turbo is working with Ender 3 v2 stock display.
But a special display cable is required.
Att…
-
### FileNotFoundError:
When I try to compile I get the following error?
`> Executing task: C:\Users\r_vei\.platformio\penv\Scripts\platformio.exe run --environment STM32F103RC_btt_512K <…
-
I've been trying for 2 days to recompile other folks firmware and also tried editing the stock marlin 2 software to no avail. I am using VSC and Platformio and I have no experience with this kind of s…
-
If the MBED outputs are not initialized, the laser is turned ON.
This may be due to significant pull-down in LPC outputs.
Perform measurements, and maybe change resistor values, or add extra pull-up r…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
Since https://github.com/MarlinFirmware/Marlin/commit/94e9f26544d77d22c67a8973a4b480411ecfe7d…
-
while compiling code in platformio in vs-code am getting this error.
In file included from Marlin\src\HAL\shared\../../inc/MarlinConfig.h:30,
from Marlin\src\HAL\shared\I2cE…
-
### Description
Ender 3 - Skr mini e3 v2: I can not save to EEPROM from marlin or terminal. When I flash new firmware (bugfix 30/7-20) I do M502, M500 and get: echo:Error writing to EEPROM!
echo:E…
-
Hey,
Would it be possible to get the KiCad schematics/board uploaded here? Also, the schematic on the blog post says there are known errors, so it would be nice to have a list of those with the sch…