-
### Describe the problem
I have the following setup: https://github.com/arduino/arduino-ide/pull/1132#pullrequestreview-1031068976
When I start the application I see the following errors logged:…
-
Can you please put the Allwinner V831 SDK up somewhere? We have a bunch of code running on the Allwinner V536 using their MPP library to implement WebRTC. I think this WebRTC code should easily port …
-
Personally I'd like to be able to run my motors at 36v or 48v and I know there are TMC5160 drivers that support this, but the 6-Pack is limited by the onboard VR and a few other components.
What do y…
-
So I have got myself a [USB to Serial Adapter](https://www.amazon.com/gp/product/B00LZV1G6K/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1) on Amazon, but I'm still getting the following error. Any …
-
hi,
When i run script below, i always got those error:
When i use "kpu.load_flash", i…
-
What version full firmware can run model has 1.81M kmodel ? ( model was trained from colab with architecture mobilenet7_5)
-
# Getting Started with the Sipeed Maixduino Kit | Blog | Garrett Goss
None
[https://garrettgoss.com/blog/2019/07/getting-started-with-the-sipeed-maixduino-kit.html](https://garrettgoss.com/blog/2019…
-
can't display preview video in IDE
neolu updated
11 months ago
-
We need a brave person with a CNC machine (powered by a GRBL controller) who would be willing to test the `GRBLPrinter` implementation here:
https://github.com/selfcustody/krux/blob/develop/src/krux/…
ghost updated
11 months ago
-
**Describe the bug**
I tried to build MaixPy with TensorFlow Lite Micro hello world example, but fail in finding *.h in MaixPy build. I am not familiar with cmake build, does not know how to add "inc…