-
I cloned the UART MPLAB config and changed the capabilities in `microchip.h`to `blCapUSBInterface`. In looking at the build output for a Fubarino SD USB, I see `cdccam.o`. Do I need to make further ch…
-
Greetings,
I have run into an issue while upgrading my SAM L21 crates. With the SVD file [ATSAML21G16B.svd](https://github.com/RavuAlHemio/rust-svd/blob/main/atsaml21g16b/ATSAML21G16B.svd), svd2rus…
-
I am able to build the core image with:
`MACHINE=sama5d27-som1-ek-sd bitbake core-image-minimal`
But I run into a cryptoauthlib error when I run:
`MACHINE=sama5d27-som1-ek-sd bitbake microchip-he…
-
As commented in #1 you should think more about your overall power supply now that you're also adding USB power, including making sure you aren't back-powering either the barrel jack (J10 in V4) or USB…
-
**Describe the solution you'd like**
ABI version is missing in the shared library.
`readelf -d lib/libcryptoauth.so | grep SONAME
0x0000000e (SONAME) Library soname: [lib…
-
This leaves me little choice but to *remove the relevant links* because since microchip is constantly moving resources around, and you cant have a core where half the links are broken and you're not …
-
We are running Zephyr on a STM32L486 based system, using SST26VF032B QSpi flash.
The flash erase function works unstable.
After going deep down into the flash_stm32_qspi.c driver, we can see that…
-
MCC v5.3.7
Core v5.5.7
Legato v2.3.15
MPLABX IDE v6.15
Hi,
We are transitioning from MHC3 to MCC and are having some issues with the graphics composer.
More specifically it seems that the composer …
-
nice part:
Microchip - MCP3424-E/SL
http://octopart.com/mcp3424-e%2Fsl-microchip-7183533
associated arduino libraries:
http://www.abelectronics.co.uk/adcpiarduino/info.aspx
-
Is this project finished?