-
```
Hi I'm using the arduino IDE 1.5.6 and arduino YUN to test it, but it give me
this error "cannot convert 'Serial_*' to 'HardwareSerial*' for argument '1' to
'void modbus_configure(HardwareSerial…
-
```
Hi I'm using the arduino IDE 1.5.6 and arduino YUN to test it, but it give me
this error "cannot convert 'Serial_*' to 'HardwareSerial*' for argument '1' to
'void modbus_configure(HardwareSerial…
-
**Notes**
I simplified the modbus RTU samples (server and client) to a few lines of code (see below) and I am running two nRF52840 development boards: one as server and one as client with serial rx a…
-
Hi Stephan,
I add in ha my first inverter and it works well :-) Then a couple of days after I configure another inverter as a slave (with parallel option) and add it too to ha. Configuration seems …
-
```
Description: Modbus can be used with USB serial, however, if the USB
serial connection is lost, Modbus will hang in an infinite
loop.
This is a prob…
-
### The problem
I'm running a Modbus readout on an ESP32 (wroom32 dev board), in combination with a MAX485 board (the one that has DI, RE, DE, RO).
Often see messages in the logs about operation…
-
**Describe the bug**
Modbus RTU and RTUoverTCP switches should wait for the response (confirmation) in order to confirm the new state of the switch.
The switch button should wait the response of the…
maufc updated
1 month ago
-
Hello,
I have the 12 kw Deye Hybrid inverter with SolarMan datalogger. I want to be able to set the "Solar Sell" value from HA automations. I already installed the Nordpool add-on so I can watch fo…
Ralle updated
3 weeks ago
-
```
Hi I'm using the arduino IDE 1.5.6 and arduino YUN to test it, but it give me
this error "cannot convert 'Serial_*' to 'HardwareSerial*' for argument '1' to
'void modbus_configure(HardwareSerial…
-
```
Hi I'm using the arduino IDE 1.5.6 and arduino YUN to test it, but it give me
this error "cannot convert 'Serial_*' to 'HardwareSerial*' for argument '1' to
'void modbus_configure(HardwareSerial…