-
is it possible to change the n-channel mosfet ncep60t20 to the n-channel mosfet irf3205. because irf mosfet is much cheaper in my country.
-
Yesterday I installed the newest software and soldered the chip in but I get the error long long short and I don’t really know what a mosfet is due to my bad English. How can I solve this?
-
Add :
~ Mosfet Gate driver, Like : ir2106, ir2110 or other
~ LED-LDR optocoupler, like : LCR0202, or other
-
Hello, this is just a question.
I'm trying to build an [high altitude compensator](https://github.com/olivluca/TrumaCompensator) for my truma combi d, but I'm not good at electronics design, so I'm…
-
I realize that stepper motor is in the todo list, but I stll want to lift the posibilty to use RC-servos to controll valves.
-
Develop new IGBT models like what we did for the MOSFET models :
- [ ] Detailed IGBT (Datasheet)
- [ ] Detailed IGBT (Spice NIGBT)
- [ ] Spice Subcircuit compatibility ?
-
Hi mate, your library seams fantastic, I was looking for something that hardware-directly drives the power stage, leaving CPU for other purposes. I'm going to test it soon :) thanks for sharing!
As d…
-
I want to switch ON a MOSFET when the OUT Pin of RCWL 0516 goes High and switch off MOSFET when it's Low.
I connected the OUT pin directly to the gate of a MOSFET, but the MOSFET is not completely …
-
Hello Thank you for creating this nice firmware, I have an lk5pro and I installed 2 mosfet 1 for the bed and one for the nozzle if I try to set the temperature display of the nozzle I do not time out …
-
## Expected Behavior
The gm/ID MOSFET sizing methodology is widely used among analog circuit designers. It is known, how a physical, well-behaved MOSFET characteristic should look like.
## Actua…