-
I am trying to create a stepper control on an Edison board by doing the following taken from the johnny-five docs
stepper = new five.Stepper({
type: five.Stepper.TYPE.DRIVER,
stepsPerRev: 2…
-
when i run a script it will run up to a certain point and then doesnt print the full string just the first 5 characters, i think this may be an issue with the serial communication
I have changed the …
-
One of the nicest features of the Arduino OSC library was the support for all kind of transports, including Serial.
Its great for non networked MCUs to have a good high level protocol to speak to a P…
-
**~/owt-server$ sudo scripts/build.js -t mcu --check**
/home/zsw/owt-server/build/libdeps/build/lib/pkgconfig:/home/zsw/owt-server/build/libdeps/build/lib64/pkgconfig:
Following targets will be buil…
LLADX updated
2 years ago
-
**Is your feature request related to a problem? Please describe.**
When running on 240V bed temperature is limited to 110C.
**Describe the solution you'd like**
I would like to be able to set bed…
-
My biggest problem with the original WEMOS D1 Mini or Node MCU was the poor WIFi signal.
Now I've found and tested this, with external antenna.
WEMOS D1 Mini Pro 4M 16M Bytes External Antenna Co…
-
I'm used the Node MCU ESP8266 microcontroller, and there were some tweaking that needed to be done to get FastLED to work for the Arduino ide, specifcally, including 1 line of code from here:
https:/…
-
Hi, i've use your code on my esp8266 and it's work but when i connect to fake Ap, it's not show page to enter password, i must enter 192.168.4.1 to see the fake page. How i can fix that? Thank you
-
Just watched the presentation from [ROSCon 2015 Hamburg](https://vimeo.com/142150576), which mention TTL UART is a future goal. What about i2c? That seems like a good target as most MCUs have onboard …
-
Hello, I hope I'm not asking a question well documented in this project, because I failed to find any, I spent most the time digging the application part of this project.
So how does it work? Can s…