-
Hello. I'm building this eBus converter and trying to connect it to ebusd: https://wiki.fhem.de/wiki/EBUS
I've trimmed it as best I can with my bench equipment, and measured the voltages, etc. and …
-
### The problem
seeing below error in logs after updating to September beta and restarting consistently
`number.opentherm_domestic_hot_water_setpoint` no longer being available
### What versi…
-
### The problem
When you call
SERVICE OPENTHERM_GW.SET_CONTROL_SETPOINT with a value other than 0 the boiler start the cental heating as expected.
unfortunatley this last just a couple of minu…
-
I connected to the wifi AP on my phone (http://192.168.4.1) and only configured the wifi connection -with the idea to continue configuring on my pc-. However after opening the websever (via the ip add…
-
Hi,
I think it would be useful to expand the README.md and add some info comparing this firmware and its capabilities to alternatives. So far I have found the following:
A library to interface …
-
https://github.com/rvdbreemen/OTGW-firmware/wiki/How-to-use-it-with-Home-Assistant-or-Domoticz-or-others
Could you add Homey as a supported platform? I posted instructions on how to use with Homey …
-
I am unable to change the Max CH setpoint.
My boiler is set to a maximum temperature of 80°C.
OTGW has a (default?) Max CH setpoint of 70°C
I tried setting it to match my boilers temp of max te…
-
OT Debugging BLB4
[HeishaMon.ino.elf.zip](https://github.com/Egyras/HeishaMon/files/12500911/HeishaMon.ino.elf.zip)
-
### The problem
I used OTGW integration for several years with no problems. Recently I tried to switch on the heating in my house, but the whole integration was somewhat flaky. There was a very small…
-
**Description of setup:**
Evohome controller, connected to Remeha Elga Ace heatpump with R8810A1018 (Opentherm module)
Firmware version: WiFi module: 02.00.17.00, Application module: 02.00.19.33
…