-
### The problem
Viessmann gas boiler, has sensor.opentherm_dhw_flow_rate, which reporting DHW flow rate in "l/min".
In every start, HA reporting there two warnings:
Logger: homeassistant.compone…
-
### The problem
Intergas intergration was working fine for an extended period of time, till I ran the upgrade of core-2024.1.x to 2024.2.0 (and later 2024.2.1).
Best guess is the Python version up…
-
Подскажите как установить на термостате Heating целевую температуру 23,0 °C?
На термостате можно установить минимальную температуру 35°C.
Термостат контролирует температуру теплоносителя (heating t…
-
### The problem
The "Room Temperature" sensor from the OpenTherm Gateway integration is calculated from a 16-bit value by intepreting it as a fixed-point value with 8 bits of integer part, 8 bits of …
-
Hello and congratulations for your very good work!
While trying out the latest feature for a 0-100% heater entity when pwm is set to zero, it turns out that input_number helpers cannot be used.
Th…
-
### The problem
When working with the home assistant web UI I experience freezing of the UI for a couple of seconds. Inputs from keyboard and mouse not directly shown on the screen, but after a coupl…
-
### The problem
OTGW suddenly stopt working. Not able to reload or start after restarting HA.
### What version of Home Assistant Core has the issue?
2024.3.1
### What was the last working version …
-
Does this project support ESP32 boards? I have the DIYLESS adapter and an S2 mini ESP32 board
-
All the entities created by the integration are unavailable. I'm not able to reload the integration, due to errors.
Home Assistant 2024.4.4
Ariston NET 0.19.1
My Ariston device is a Velis Evo2, m…
-
Nie mogę się połączyć z piecem z komunikacją Openterm
{I cannot connect to a gas furnace with Opentherm communication}
Z tym https://github.com/rsciriano/ESPHome-OpenTherm
I konfiguracji
```
// …