-
Hello! I've been thinking about some problems in csi_fuzzer recently. I have the following two questions to ask you.
1. What is the time rate at which the filter tap changes in csi_fuzzer? I guess …
-
0. Could you send email to [xianjun.jiao@ugent.be](mailto:xianjun.jiao@ugent.be) to introduce your self?
Sent
1. Our image is used directly or you build your own image?
I used the image "openwifi…
-
Hello,
I want to compile the Linux kernel under zed_fmcs2.
As a preliminary test, I used an unmodified kernel to test if the compilation was successful.
After this command:
./prepare_kernel.sh $XI…
-
Hi,
I followed the last developments of the openwifi project with high interest and I have successfully started the release Notter 1.4.0 by using the "zed_fmcs2-board".
In the following I would…
-
0. Could you send email to xianjun.jiao@ugent.be to introduce your self?
_title "neptunesdr rev3 support" dated September 25, 2023_
1. Our image is used directly or you build your own image?
_openw…
-
This is what I did:
1. Install WSL on windows 10.
2. Install Ubuntu 18.04.5 on WSL.
3. git clone https://github.com/open-sdr/openwifi
Prepare Analog Devices Kernel
5. cd openwifi/user_space
…
-
Compiled openwifi-hw, pulled the latest github code, and followed the steps strictly. In the last step of "Generate Bitstream", the system module could not be found. See the attached file.
![openwifi…
-
Hei,
My endgoal is to make the [Radar for openwifi](https://github.com/open-sdr/openwifi/blob/06fbd98167853a5d46c801bea395cf55440140ae/doc/app_notes/radar-self-csi.md) work on my antsdr E310. For t…
-
-
Getting this error when run wgd.sh:
Run wgd.sh appears when loads the recompiled driver ssdr.ko has a problem
root@analog:~/openwifi# ./wgd.sh
![image](https://user-images.githubusercontent.c…