-
Hello. I am trying the lorawan code on heltec wireless paper and it works fine. But when I add the code for e-ink display to it , both display and lorawan doesn't work. Please advise. Thanks
-
### Firmware Version
2.5.0
### What did you do?
Favorites not sticking after favoriting
### Expected Behavior
Favorite nodes should stick
### Current Behavior
After some time it will forget f…
-
### Category
Other
### Hardware
Rak4631
### Firmware Version
2.4.0.46d7b82
### Description
When attempting to set a new url on a remote note, which includes a change in LoRa channel slot, the r…
-
Hello,
nrf24l01 has 3x32bytes buffe so it can store at least 3 messages in that buffer ( 32bytes/message ). My question about that part of code is that when you have 3 messages in radio buffer that w…
-
Radios on the badge have sleep mode (ATSM2) set by default.
We need todo some tests around this as we need to make sure when putting the radio to sleep we give it enough time to send the last outgoin…
-
I have been looking at your gateway code and notes, trying to figure out how to simultaneously receive ESPNOW packets while being connected to an AP. Below is my attempt at the minimum receiver setup.…
-
I'm trying to analyze .pcap files with tcpflow -r tcp and get "sorry - unknown datalink type 169 on interface" The files I want to analyse are not generated by tcpflow. Am I doing something wrong or i…
-
Everything seems to be working; I am decoding received packets no problem and when I transmit I get a green log message, VOX is tripped (I am using AFSK) and the radio transmits the packet. I have a …
-
```
> dmrconf -D ttyUSB0 -R DR1801UV write '2024-07-22 DR1801 01.yaml'
Warning in ***@***.***: Verification Issue: Warn: In : The support for this radio is still under development. Some features may…
-
This issue will help you become acquainted with PacketComm, and the flow of packets through the Teensy FSW. It is helpful to think in terms of packets and their flow, since the is the primary method b…