-
Hello Ysurac,
Can you recommend a 5G modem that can be used with openMPTCProuter?
-
i saw a small issue in document.
88. cpl_write (page 42) s_axis_cpl_enqueue_resp_*: The response arrives at the completion write module
89. cpl_write (page 42) m_axis_req_status_*: The completion wr…
-
**What happened**:
**Method used:**
I used a CDI import, which was then used to create a 'custom template vm', which was successful, and then cloned to create a VM - retaining the datavolu…
-
I have discovered that the new Raspberry Pi 5 should be compatible with the Blackmagic DeckLink SDI Micro card through the PCIe interface.
I am planning to order a couple of these cards to test with,…
-
Well, if one is good (see #40), two is surely better, right?
Originally inspired by [chinmaythosar's comment](https://github.com/geerlingguy/raspberry-pi-pcie-devices/issues/3#issuecomment-74395782…
-
I have a crucial ct250 m.2 250GB ssd used for system (c:), a Sandisk sx350 pcie 3200GB ssd for data (e:) and 2 hdd (b: & d:)
both ssd data are mixed together (see scrennshot), especially visible with…
-
Hi,
I got a pcie (firefly m.2 ngff M-Key) to sata board. Kernel source is from this repository and archlinux arm rootfs.
I config the dts to turn on pcie 3.3v power, and I tested ok.
lspci…
-
Hi, I recently upgraded from 5.4 to 5.10 and after booting I noticed that the LEDs weren't working any more. Investigating, I found the leds-gpio module didn't load cause of "error -16". Looking at dm…
-
Suppose we wanted to build a 10G EasyNIC. Is there suitable hardware available?
Surprisingly to me, the answer seems to be yes. Here is a suggestion from a twitter conversation with @daveshah1 and …
-
SSIR Automotive team is partnering with multiple Tier1/ OEMs in developing End to End solutions based on **Samsung's Exynos Auto SOC for IVI/ ADAS**
1. Deep exposure to **ARM architecture**
2. Kno…