-
I get the error:
`(node:3769) UnhandledPromiseRejectionWarning: Unhandled promise rejection (rejection id: 1): Error: connect ECONNRESET 192.168.1.16:80`
When I try to run:
```
var Hue = req…
-
### What happened?
Device IKEA LED2201G8 (firmware 3.0.10) goes in pairing mode or in "power on behaviour" every few minutes.
After a while, device is no more present in the Devices List.
### What …
-
### What happened?
I'm using a group binding to control a Zigbee light ([Paul Neuhaus NLG-TW](https://www.zigbee2mqtt.io/devices/NLG-TW_light.html)) from a zigbee switch ([Legrand 067773](https://w…
-
Hi,
When I add more than 16 lamps to the bridge it seems the new lamps show disconnect in node-red although they still work in node-red. When I add a 2nd node as bridge, new lamps (17+) show connecte…
-
I'm getting the below error all of a sudden, I thought that there may of been a clash with an activity on one of my hubs, but I have even deleted all the activities to test it, but to no avail?
11/…
-
[Philips Hue bulbs now come with Bluetooth!](https://www.signify.com/global/our-company/news/press-releases/2019/20190627-signify-launches-philips-hue-with-bluetooth)
I'm not even sure there's an A…
-
It works great for grouping my Philips Hue lights, thanks for that! There is just one thing 'missing'. The 'feedback' on the light status. When e.g. I turn on the lights in the livingroom by voice an…
kukel updated
5 years ago
-
### The problem
#### Summary
When setting color temperature of a bulb that is off, it seems that color temperature value is not sent.
Bulb used is a (set of) Ikea E26 1100lm bulbs.
Zigbee2MQTT i…
-
**Describe the bug**
After node-red-restart, there is no access to the light anymore. The node-red-log shows an error very early after restart
`16 Jun 15:29:40 - [info] [hue-bridge:Philips hue II]…
-
This will relieve some pressure on the pi, and allow people to adopt the service easier if they don't have on.
Also will make the authentication dance clearer.