-
**Skills Required:** Basic Fritzing/Image Manipulation/Writing
**Difficulty:** Easy
## Challenges/Thoughts:
Use the Oak Fritzing part (to get it see #38) to put together a simple Fritzing connection…
-
The Raspberry Pi GPIO pins are only digital pins, which means the photoresistor cannot directly be used with it. Therefore, I am trying to use an Adafruit ADS1115 ADC to get a digital signal.
-
-
-
Hello openv Guys,
first, thanks for all the work you are doing here, it's great.
The Heater is a Vitodens 222-F with a Vitronic 200, Type HO1B
I have a problem with my DIY optolink ESP32. It …
-
One issue with the Rdkr that I'm having is that the heat exchanger (rotor) gets stopped when the outdoor temperature gets close to the set inlet temperature. This is all fine on cold days, but on hot…
-
Hi and thanks for all the work!
I am interested in building some of them myself. Looks like I have to order pretty much everything myself. Could you give some hints/links on how to do that?
I've…
-
Is there any update on when the ESP version will support dry contact configuration?
-
![want-you](https://user-images.githubusercontent.com/8080177/206915216-49011ad2-0374-492d-809c-3f5f94b9f100.png)
I would like to know how people are using this software. As I have developed a lot …
-
- Are the input pins floating? Should they have pull-ups?
- Do the trigger levels for detecting sensor on/off need to be auto-calibrated based on changes in ambient room light?