-
The Camera Hardware schematics (https://www.raspberrypi.com/documentation/accessories/camera.html#schematics) shows the pinout of the 15 pin camera connector, but not the 22 pin version used.
Could…
-
### Category
Hardware Compatibility
### Hardware
T-Echo
### Firmware Version
2.5.11.8e2a3e5
### Description
Pinout for Matrix LED on T-Echo is wrong(incomplete)
By reviewing the vendors scem…
-
Good afternoon
Is it possible change the pin from Z to Y? I'd like to use your GRBL, but my pcb are X 2,3,4,5 ad Y6,7,8,9
Carlo
-
Please add to the wiki.
Sorry, but the motherboard was from …
-
Hi @truesurge!
Thanks for great work on reverse engineering and redesigning the BMS!
Can I ask you to either submit the principal circuit diagram, or to add a PCB image with pinout?
As far as I …
-
Can you provide the pinout for the input and output headers? I like the Octo board, but I'd like to be able to make my own I/O adapters with balanced input and output instead of the unbalanced RCA jac…
-
Hi, i m working on the same thing too, do you have the pinout for rj22 to db9 ?
-
As discussed in m-labs/migen#180, the pinout and schematics indicate the serial wire names from the µC perspective. Should at least the netlist be changed to reflect the FPGA perspective?
-
Hi. I am curious what pin is assigned to neopixel led in release please. Tahnk You
-
I am trying to follow your method but get a lot of random moves on all axes. Did you cut out the pin from the bottom where you connected the jumper wire?
Thanks